HIGH NSE7_PBC-7.2 QUALITY - NSE7_PBC-7.2 EXAM PASSING SCORE

High NSE7_PBC-7.2 Quality - NSE7_PBC-7.2 Exam Passing Score

High NSE7_PBC-7.2 Quality - NSE7_PBC-7.2 Exam Passing Score

Blog Article

Tags: High NSE7_PBC-7.2 Quality, NSE7_PBC-7.2 Exam Passing Score, Latest NSE7_PBC-7.2 Dumps, NSE7_PBC-7.2 Premium Exam, Valid NSE7_PBC-7.2 Exam Duration

For candidates who are going to buy the NSE7_PBC-7.2 questions and answers online, they pay more attention to the prospect of personal information. We respect the privacy of our customers. If you buy the NSE7_PBC-7.2 exam dumps from us, your personal information such as your email address or name will be protected well. Once the order finishes, the information about you will be concealed. In addition, NSE7_PBC-7.2 Questions and answers are revised by professional specialists, therefore they are high-quality, and you can pass the exam by using them.

Fortinet NSE7_PBC-7.2 exam is a certification exam that focuses on public cloud security. NSE7_PBC-7.2 exam is designed for IT professionals who want to validate their knowledge and skills in securing public cloud infrastructures. The Fortinet NSE7_PBC-7.2 exam is based on the Fortinet Network Security Expert (NSE) 7 certification program, which is one of the most recognized and respected cybersecurity certification programs in the industry.

Fortinet NSE7_PBC-7.2 Exam is intended for IT professionals who work with public cloud environments, including cloud administrators, cloud architects, security engineers, and network engineers. NSE7_PBC-7.2 exam is also suitable for IT professionals who are seeking to enhance their knowledge and skills in cloud security.

>> High NSE7_PBC-7.2 Quality <<

Free PDF Quiz High-quality Fortinet - High NSE7_PBC-7.2 Quality

With all the above merits, the most outstanding one is 100% money back guarantee of your success. Our Fortinet experts deem it impossible to drop the NSE7_PBC-7.2 exam, if you believe that you have learnt the contents of our NSE7_PBC-7.2 study guide and have revised your learning through the NSE7_PBC-7.2 Practice Tests. If you still fail to pass the exam, you can take back your money in full without any deduction. Such bold offer is itself evidence on the excellence of our NSE7_PBC-7.2 study guide and their indispensability for all those who want success without any second thought.

Fortinet NSE7_PBC-7.2 (Fortinet NSE 7 - Public Cloud Security 7.2) Certification Exam is designed for individuals who want to validate their knowledge and skills in securing public cloud environments. NSE7_PBC-7.2 exam covers various topics related to public cloud security, including cloud security architecture, cloud security management, cloud security operations, and cloud security services. Passing NSE7_PBC-7.2 Exam demonstrates that the candidate has the expertise to secure public cloud environments using Fortinet products and solutions.

Fortinet NSE 7 - Public Cloud Security 7.2 Sample Questions (Q46-Q51):

NEW QUESTION # 46
Refer to the exhibit. You attempted to access the Linux1 EC2 instance directly from the internet using its public IP address in AWS.

However, your connection is not successful.
Given the network topology, what can be the issue?

  • A. There is no connection between VPC A and VPC B.
  • B. The Transit Gateway BGP IP address is incorrect.
  • C. There is no elastic IP address attached to FortiGate in the Security VPC.
  • D. There is no internet gateway attached to the Spoke VPC A.

Answer: D

Explanation:
This is because the Linux1 EC2 instance is not accessible directly from the internet using its public IP address in AWS.
An internet gateway is a horizontally scaled, redundant, and highly available VPC component that allows communication between instances in your VPC and the internet. Without an internet gateway, the Linux1 EC2 instance cannot receive or send traffic to or from the internet, even if it has a public IP address assigned to it.
To fix this issue, you need to attach an internet gateway to the Spoke VPC A and configure a route table that directs internet-bound traffic to the internet gateway. You also need to ensure that the Linux1 EC2 instance has a security group that allows inbound and outbound traffic on the desired ports.


NEW QUESTION # 47
Refer to the exhibit. You deployed an HA active-active load balance sandwich with two FortiGate VMs in Microsoft Azure. After the deployment, you prefer to use FGSP to synchronize sessions, and allow asymmetric return traffic In the environment, FortiGate port 1 and port 2 are facing external and internal load balancers respectively What IP address must you use in the peerip configuration?

  • A. The opposite FortiGate port 2 IP address.
  • B. The opposite FortiGate port 1 IP address.
  • C. The public load balancer port 2 IP address
  • D. The internal load balancer port 1 IP address.

Answer: A

Explanation:
In an HA active-active load balance configuration with FortiGate VMs, especially in Microsoft Azure where FGSP (FortiGate Session Life Support Protocol) is used for session synchronization, the correct configuration for the peerip is: D. The opposite FortiGate port 2 IP address.
HA Synchronization Requirements: FGSP requires direct communication between the FortiGates to synchronize the session table. This synchronization typically occurs over a dedicated HA link that connects the HA pair.
Asymmetric Traffic Considerations: FGSP allows asymmetric traffic to rejoin the correct session by synchronizing session information, including NAT and TCP sequence tracking between the FortiGate units in a cluster.
Configuration Specifics: For port 2, which is facing the internal load balancer, the peerip should be set to the corresponding port 2 IP address of the opposite FortiGate. This allows the internal interfaces to communicate directly with each other for session synchronization purposes, which is crucial in an active-active deployment to ensure sessions persist during failover scenarios.


NEW QUESTION # 48
Refer to Exhibit. You are troubleshooting a Microsoft Azure SDN connector issue on your FortiGate VM in Azure.

Which three settings should you check while troubleshooting this problem? (Choose three.)

  • A. use the diag sys va command.
  • B. Ensure FortiGate port4 can resolve DNS.
  • C. Ensure IP address 169.254.169.254 is not blocked
  • D. Use the show vdom command to see hidden VDOMs.
  • E. Ensure FortiGate port1 has internet access

Answer: B,C,E

Explanation:
The three settings that should be checked while troubleshooting this problem are:
- Ensure FortiGate port4 can resolve DNS. This is because the Azure SDN connector requires DNS resolution to communicate with the Azure API. If the FortiGate port4 cannot resolve DNS, the SDN connector will not be able to retrieve the Azure resources and display them in the GUI.
- Ensure FortiGate portl has internet access. This is because the Azure SDN connector requires internet access to communicate with the Azure API. If the FortiGate portl does not have internet access, the SDN connector will not be able to connect to the Azure cloud and display an error in the CLI.
- Ensure IP address 169.254.169.254 is not blocked. This is because the Azure SDN connector uses this IP address to obtain metadata information from the Azure instance. If this IP address is blocked by a firewall policy or a network ACL, the SDN connector will not be able to get the required information and display an error in the CLI.


NEW QUESTION # 49
Your company deploys FortiGate VM devices in high availability (HA) (active-active) mode with Microsoft Azure load balancers using the Microsoft Azure ARM template. Your senior administrator instructs you to connect to one of the FortiGate devices and configure the necessary firewall rules. However, you are not sure now to obtain the correct public IP address of the deployed FortiGate VM and identify the access ports.
How do you obtain the public IP address of the FortiGate VM and identify the correct ports to access the device?

  • A. In the configured load balancer, access the backend pools section.
  • B. In the configured load balancer, access the inbound and outbound NAT rules section.
  • C. In the configured load balancer, access the inbound NAT rules section.
  • D. In the configured load balancer, access the health probes section.

Answer: C

Explanation:
From the resource group Overview page, click the external load balancer name to load it. From the navigation column, click Inbound NAT Rules.
It is more economical and secure to associate a public IP address to a load balancer or to an individual virtual machine (also known as a jumpbox), which then routes incoming connections to scale set virtual machines as needed (for example, through inbound NAT rules).


NEW QUESTION # 50
You have created a TGW route table to route traffic from your spoke VPC to the security VPC where two FortiGate devices are inspecting traffic. Your spoke VPC CIDR block is already propagated to the Transit Gateway (TGW) route table.
Which type of attachment should you use to advertise routes through BGP from the spoke VPC to the security VPC?

  • A. Route attachment
  • B. Connect attachment
  • C. VPC attachment
  • D. GRE attachment

Answer: C

Explanation:
A VPC attachment is the type of attachment that allows you to connect a VPC to a TGW and advertise routes through BGP. A VPC attachment creates a VPN connection between the VPC and the TGW, and enables dynamic routing with BGP. A connect attachment is used to connect a VPN or Direct Connect gateway to a TGW. A route attachment is not a valid type of attachment for TGW. A GRE attachment is used to connect a FortiGate device to a TGW using GRE tunnels. Reference:
Creating the TGW and related resources
Configuring TGW route tables
FortiGate Public Cloud 7.2.0 - Fortinet Documentation
Updating the route table and adding an IAM policy


NEW QUESTION # 51
......

NSE7_PBC-7.2 Exam Passing Score: https://www.testpassking.com/NSE7_PBC-7.2-exam-testking-pass.html

Report this page